cxSlicePlanes3DRep.cpp

Go to the documentation of this file.

/*=========================================================================
This file is part of CustusX, an Image Guided Therapy Application.

Copyright (c) 2008-2014, SINTEF Department of Medical Technology
All rights reserved.

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, 
   this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, 
   this list of conditions and the following disclaimer in the documentation 
   and/or other materials provided with the distribution.

3. Neither the name of the copyright holder nor the names of its contributors 
   may be used to endorse or promote products derived from this software 
   without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=========================================================================*/


#include "cxSlicePlanes3DRep.h"

#include <boost/bind.hpp>
#include <vtkRenderer.h>
#include <vtkMatrix4x4.h>
#include <vtkActor2D.h>
#include <vtkTextProperty.h>
#include <vtkTextActor3D.h>

#include "cxView.h"
#include "cxSliceProxy.h"
#include "cxVtkHelperClasses.h"
#include "cxTypeConversions.h"

namespace cx
{

SlicePlanesProxy::SlicePlanesProxy()
{
        mConnectedTo3D = false;
        mVisible = true;
        mDrawPlane = false;

        QColor color1 = QColor::fromRgbF(0, 1, 1);
        QColor color2 = QColor::fromRgbF(0, 0.6, 1);
        QColor color3 = QColor::fromRgbF(0.5, 0.5, 1);
    QColor color4 = QColor::fromRgbF(0.75, 0.75, 1);

        mProperties.mColor[ptAXIAL] = color1;
        mProperties.mSymbol[ptAXIAL] = "A";

        mProperties.mColor[ptCORONAL] = color2;
        mProperties.mSymbol[ptCORONAL] = "C";

        mProperties.mColor[ptSAGITTAL] = color3;
        mProperties.mSymbol[ptSAGITTAL] = "S";

        mProperties.mColor[ptANYPLANE] = color1;
        mProperties.mSymbol[ptANYPLANE] = "O";

        mProperties.mColor[ptSIDEPLANE] = color2;
        mProperties.mSymbol[ptSIDEPLANE] = "|";

        mProperties.mColor[ptRADIALPLANE] = color3;
        mProperties.mSymbol[ptRADIALPLANE] = "X";

    mProperties.mColor[ptTOOLSIDEPLANE] = color4;
    mProperties.mSymbol[ptTOOLSIDEPLANE] = "T";

        mProperties.m2DFontSize = 20;
        mProperties.m3DFontSize = 28;
//      mProperties.mPointPos_normvp = Vector3D(0.1, 0.8, 0.0);
        mProperties.mPointPos_normvp = Vector3D(0.05, 0.95, 0.0);
        mProperties.mClipPlane = ptANYPLANE;
        mProperties.mLineWidth = 2;
        //  mProperties.mDrawPlane = false;
}

void SlicePlanesProxy::connectTo3D(bool on)
{
        mConnectedTo3D = on;
}

void SlicePlanesProxy::clearViewports()
{
        mData.clear();
}

void SlicePlanesProxy::setVisible(bool visible)
{
        mVisible = visible;
        emit changed();
}

bool SlicePlanesProxy::getVisible() const
{
        return mVisible && mConnectedTo3D;
}

void SlicePlanesProxy::setDrawPlanes(bool on)
{
        mDrawPlane = on;
        emit changed();
}

bool SlicePlanesProxy::getDrawPlanes() const
{
        return mDrawPlane;
}

void SlicePlanesProxy::setViewportData(PLANE_TYPE type, SliceProxyPtr slice, const DoubleBoundingBox3D& vp_s)
{
        if (!slice)
                return;

        if (!mData.count(type))
        {
                DataType data;
                data.mPointPos_normvp = mProperties.mPointPos_normvp;
                data.vp_s = vp_s;
                data.mSliceProxy = slice;
                data.mColor = mProperties.mColor[type];
                data.mSymbol = mProperties.mSymbol[type];

                connect(data.mSliceProxy.get(), SIGNAL(transformChanged(Transform3D)), this, SIGNAL(changed()));
                mData[type] = data;
        }

        mData[type].vp_s = vp_s;

        emit changed();
}

void SlicePlanesProxy::addSimpleSlicePlane(PLANE_TYPE type, PatientModelServicePtr dataManager)
{
        SliceProxyPtr slice = SliceProxy::create(dataManager);
        slice->initializeFromPlane(type, false, true, 1, 0.25);

        this->setViewportData(type, slice, DoubleBoundingBox3D(0, 1, 0, 1, 0, 1));
}

SlicePlanesProxy::DataMap SlicePlanesProxy::getData()
{
        return mData;
}



SlicePlanes3DRepPtr SlicePlanes3DRep::New(const QString& uid)
{
        return wrap_new(new SlicePlanes3DRep(), uid);
}

SlicePlanes3DRep::SlicePlanes3DRep() :
        RepImpl()
{
}

SlicePlanes3DRep::~SlicePlanes3DRep()
{
        if (mProxy)
                mProxy->connectTo3D(false);
}

void SlicePlanes3DRep::setDynamicLabelSize(bool on)
{
        if (on)
        {
                mViewportListener.reset(new ViewportListener);
                mViewportListener->setCallback(boost::bind(&SlicePlanes3DRep::rescale, this));
        }
        else
        {
                mViewportListener.reset();
        }
}

void SlicePlanes3DRep::addRepActorsToViewRenderer(ViewPtr view)
{
        this->changedSlot();
        if (mViewportListener)
                mViewportListener->startListen(view->getRenderer());
}

void SlicePlanes3DRep::removeRepActorsFromViewRenderer(ViewPtr view)
{
        if (mViewportListener)
                mViewportListener->stopListen();
        this->clearActors();
}

void SlicePlanes3DRep::clearActors()
{
        if (!this->getView())
                return;

        for (DataMap::iterator i = mData.begin(); i != mData.end(); ++i)
        {
                this->getRenderer()->RemoveActor(i->second.mText);
                i->second.mPoint.reset();
                i->second.mRect.reset();
                i->second.mAxes.reset();
        }
        mData.clear();
}

void SlicePlanes3DRep::rescale()
{
        this->changedSlot();
}

void SlicePlanes3DRep::changedSlot()
{
        if (!this->getView())
                return;

        if (!mProxy->getVisible())
        {
                this->clearActors();
                return;
        }

        SlicePlanesProxy::DataMap baseData = mProxy->getData();

        for (SlicePlanesProxy::DataMap::iterator i = baseData.begin(); i != baseData.end(); ++i)
        {
                SlicePlanesProxy::DataType& base = i->second;
                DataType& data = mData[i->first];

                if (!data.mText)
                {
                        data.mText = vtkTextActor3DPtr::New();
                        data.mText->SetInput(cstring_cast(base.mSymbol));
                        data.mText->GetTextProperty()->SetColor(getColorAsVector3D(base.mColor).begin());
                        data.mText->GetTextProperty()->SetFontSize(mProxy->getProperties().m3DFontSize);
                        data.mText->GetTextProperty()->BoldOn();
                        data.mText->GetTextProperty()->SetVerticalJustificationToBottom();
                        data.mText->GetTextProperty()->SetJustificationToLeft();
                        data.mText->GetTextProperty()->ShadowOff();
                        this->getRenderer()->AddActor(data.mText);
                }
                if (!data.mRect)
                {
                        data.mRect.reset(new Rect3D(this->getRenderer(), base.mColor));
                }

                Transform3D rMs = base.mSliceProxy->get_sMr().inv();
                Transform3D vpMnvp = createTransformNormalize(DoubleBoundingBox3D(0, 1, 0, 1, 0, 1), base.vp_s);
                Vector3D pos_s = vpMnvp.coord(base.mPointPos_normvp);
                Transform3D T = createTransformTranslate(pos_s);

                double scale = 1.0;
                if (data.mText)
                {
                        if (mViewportListener)
                        {
                                Vector3D focus = rMs.translation();
                                double size = mViewportListener->getVpnZoom(focus);
                                double planeSize = (i->second.vp_s.range()[0] + i->second.vp_s.range()[1]) / 2.0;
                                double sphereSize = std::min(0.1 / size, planeSize/5); // set to 20% of 2D plane size, but constrain upwards to 0.1/s.
                                sphereSize = sphereSize/50;
                                data.mText->GetTextProperty()->SetFontSize(mProxy->getProperties().m3DFontSize);
//                              std::cout << "set font size " << sphereSize << ", s=" << size << ", plane="<< planeSize <<  std::endl;
                                scale = sphereSize;
                        }
                }

                if (data.mText)
                {
                        Transform3D T2 = createTransformTranslate(Vector3D(0,-mProxy->getProperties().m3DFontSize,0));
                        Transform3D S = createTransformScale(Vector3D(scale,scale,scale));
//                      data.mText->SetUserMatrix((rMs * T).getVtkMatrix());
                        data.mText->SetUserMatrix((rMs * T * S * T2).getVtkMatrix());
                }

                if (data.mPoint)
                {
                        data.mPoint->setColor(base.mColor);
                        data.mPoint->setValue(rMs.coord(pos_s));
                }
                if (data.mRect)
                {
                        data.mRect->updatePosition(base.vp_s, rMs);
                        data.mRect->setLine(mProxy->getProperties().mLineWidth != 0, mProxy->getProperties().mLineWidth);
                        data.mRect->setSurface(mProxy->getDrawPlanes());
                }
                if (data.mAxes)
                {
                        data.mAxes->setPosition(rMs);
                }
        }
}

void SlicePlanes3DRep::setProxy(SlicePlanesProxyPtr proxy)
{
        mProxy = proxy;
        mProxy->connectTo3D(true);
        connect(mProxy.get(), SIGNAL(changed()), this, SLOT(changedSlot()));
        changedSlot();
}


SlicePlanes3DMarkerIn2DRepPtr SlicePlanes3DMarkerIn2DRep::New(const QString& uid)
{
        return wrap_new(new SlicePlanes3DMarkerIn2DRep(), uid);
}

SlicePlanes3DMarkerIn2DRep::SlicePlanes3DMarkerIn2DRep() :
        RepImpl()
{
}

SlicePlanes3DMarkerIn2DRep::~SlicePlanes3DMarkerIn2DRep()
{
}

void SlicePlanes3DMarkerIn2DRep::addRepActorsToViewRenderer(ViewPtr view)
{
        SlicePlanesProxy::DataType baseData = mProxy->getData()[mType];

        mText.reset(new TextDisplay(baseData.mSymbol, baseData.mColor, mProxy->getProperties().m2DFontSize));
        mText->textProperty()->BoldOn();
        mText->textProperty()->SetVerticalJustificationToTop();
        mText->textProperty()->SetJustificationToLeft();
        mText->setPosition(baseData.mPointPos_normvp);
        mText->getActor()->GetPositionCoordinate()->SetCoordinateSystemToNormalizedViewport();
        view->getRenderer()->AddActor2D(mText->getActor());
        this->changedSlot();
}

void SlicePlanes3DMarkerIn2DRep::removeRepActorsFromViewRenderer(ViewPtr view)
{
        view->getRenderer()->RemoveActor(mText->getActor());
        mText.reset();
}

void SlicePlanes3DMarkerIn2DRep::changedSlot()
{
        if (mText)
        {
                mText->getActor()->SetVisibility(mProxy->getVisible() && mProxy->getData().count(mType));
                //    std::cout << "SlicePlanes3DMarkerIn2DRep::changedSlot() " << this << " " << mProxy.get() << " - " << mProxy->getVisible() << " " << mProxy->getData().count(mType) << std::endl;
        }

}

void SlicePlanes3DMarkerIn2DRep::setProxy(PLANE_TYPE type, SlicePlanesProxyPtr proxy)
{
        //Logger::log("vm.log", "SlicePlanes3DMarkerIn2DRep::setProxy");
        mType = type;
        mProxy = proxy;
        connect(mProxy.get(), SIGNAL(changed()), this, SLOT(changedSlot()));
        changedSlot();
}

}